...
Agents are expected to have at least 90% Utilization each day.
10% of a standard 8-hour shift = 48 minutes.
48 minutes minus 30 minutes of scheduled break time = 18 minutes.
This means there are 18 minutes of buffer time per shift after scheduled breaks to absorb offline, unapproved Meeting time, unapproved Training time, excessive after call work, invalidated system or equipment issues, etc.
If you have tech issues, refer to our Tech Issues speed sheet and complete the Tech Issues Form as instructed in the speed sheet.
Make sure to go into Ready status in Five9 immediately after logging into ADP at the start of shift.
If ADP is logged 5 min before going ready and the agent goes offline 15 min before punching out of ADP to avoid end of shift call, then 20 min of unproductive time has accrued and the agent will fall under 90% utilization this day.
...
Status | Definition | Time Allowed in Status |
Ready (Voice) | On call or waiting for a call | Should be in this status the majority of the day |
Ready For | On call or waiting for a call | Use the Ready (Voice) status |
After Call Work | Used to wrap-up/leave notes for calls | 2 minutes on average |
Lunch | Lunch | 30 minutes for a standard 8.5 hour shift |
Meeting | Team meetings; One-on-ones; Coachings | Use only when scheduled by management |
Break | 2 - fifteen minute breaks for standard 8.5 hour shift | 2 - fifteen minute breaks for standard 8.5 hour shift |
Manual OB | Searching for a previous shopper to dial. | No more than 2 min on average |
Training | Agent trainings, Product Certifications, or Bridge assignments | Only use when there are training assignments scheduled |
After Call Work
Please be aware that you should always allow callers to end the call first instead of you ending first.
...
This agent did not meet the 90% Utilization expectation on this day
Utilization Pitfall
As mentioned earlier this week in meetings/emails - If you let the customer hang up first, you will move to he "After Call Work" status even though you can't see yourself in this status because it looks like you are in "Ready" status. It is important to remember to end each call all the way through to completing the disposition. Here is what to watch for specifically:
Watch for the "Caller disconnected" popup in bottom-right corner of screen:
You can know when you are in "After Call Work" status if the caller disconnected but there is still the little "1" on the blue "Call" button:
Add notes and click "Next"
Complete the call form and click "Next"
Select the disposition on the next screen
You should see a screen confirm the call is ended and the little "1" should disappear. If you forget to completely close a call out and you don't pay attention to the "1" then you'll remain in “After Call Status all day. This is an easy pitfall and could cause your utilization to plummet. This will not be considered a valid reason for low utilization since it has been explained how to avoid it.